Dashboard, switches, traveling computer Removal and installation of a combination of devices
Details of installation of a combination of devices
Details of installation of a combination of devices
Details of installation of a casing of a combination of devices
|
- Details of installation of components of a combination of devices are shown on illustrations to which all references which are found in the text belong.
- Disconnect a negative wire from the battery.
- Unblock a steering column and lower it in extreme lower situation.
- Remove the top section (3) casings of a steering column, - at the corresponding complete set release side and forward clamps, then slightly squeeze a cover and separate it from the dashboard.
- Hooking clamps a suitable wedge, remove side panels of finishing (12).
- Having wrung out outside (arrow A) clamps (4), and having pulled (arrow B) down, remove a frame (5) of facing of a combination of devices.
- Turn out screws (9).
- Remove clamps (10).
- Pull assembly of a combination of devices (A1) forward and disunite the contact socket (11) of an electrical wiring, previously having released its clamp.
- Remove a combination of devices (A1).
- In case of need release clamps and uncover with a casing a combination (15) (14).
- Installation is made upside-down, - track correctness of landing of adjusting buttons of the odometer and hours. When landing a frame (5) fill hooks (6) in an assembly bracket (13) and, pressing a frame up, achieve a reliable zashchelkivaniye of clamps, - uvulas (7) have to get to reception nests of brackets (8) combinations (A1).
|
|
|