Mercedes M-Class W163

since 1997 release

Repair and operation of the car


Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
- Power supply system and production of the fulfilled gases
   - Power supply system of petrol engines
      Check and adjustment of quantity of turns of the single course / moment of ignition/concentration WITH
      Dropping pressure in fuel system of the petrol engine
      Principle of functioning of a control system and injection of the petrol engine
      General check of system of injection of the petrol engine
      Check of injectors
      Removal and installation of components of an inlet air path
      Service of elements of the drive of a butterfly valve
      Depletion of the fuel tank
      Removal and installation of assembly of the fuel pump with the fuel reserve sensor
      Removal and installation of the locking fuel valve (only American models)
      Removal and installation of the fuel distributive highway and injectors
      Removal and installation of the fuel-supply line going from the fuel filter to the fuel highway - model 163.154.157/172/174/175
      Removal and installation of the fuel tank
   + Power supply system of diesel engines
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of components of an inlet air path

Model 163.136

Air inlet

Details of installation of an air inlet on models 163.136 (the series 111 engine)

4/16 — the Air inlet
Arrow — the Clamp

Details of installation of an air inlet on models 163.136 (the series 111 engine) are shown on an illustration, - previously remove a front grille (see the Head Kuzov).

Air cleaner

Details of installation of the air cleaner on models 163.136 (the series 111 engine)

Shooters — Rubber pillows

Details of installation of the air cleaner on models 163.136 (the series 111 engine) are shown on an illustration, - do not forget to release a hose of a cooling path from a guide on the air cleaner case.

Sensor of measurement of mass of air (MAF)

Details of installation of the MAF sensor on models 163.136 (the series 111 engine)

B2/5 — the MAF Sensor

Details of installation of the MAF sensor on models 163.136 (the series 111 engine) are shown on an illustration, - do not forget to replace a sealing ring.

Bypass air cleaner sleeve

Details of installation of a bypass air sleeve on models 163.136

4/5 — Bypass an air cleaner sleeve
B17 — the Sensor of air temperature, given to salon

Shooters — Fixing clamps

Details of installation of a bypass air sleeve on models 163.136

Shooters — Fixing clamps

Details of installation of a bypass air sleeve on models 163.136

Shooters — Fixing clamps

Details of installation of a bypass sleeve of the air cleaner on models 163.136 (the series 111 engine) are shown on illustrations.

Model 163.154/157

Details of installation of components of an inlet air path on models 163.154/157 (series 112 engines)

1/2 — the Right line of ventilation of a case
2 — the Air cleaner
2/1 — Rezonatornaya the camera

2/2 — the Air duct
2/3 — the Bolt
B2/45 — the MAF Sensor

Details of installation of components of an inlet air path on models 163.154/157 (series 112 engines) are shown on an illustration. Before removal of an air sleeve (2/2) it is necessary to disconnect a cable of the drive of an electronic accelerator (shooter), - wring out the screw-driver a lock uvula of a clamp of fastening of an air sleeve (2/2) to the actuation mechanism of an electronic accelerator down.

Model 163.172/174/175

Details of installation of components of an inlet air path on models 163.172/174/175 (series 113 engines)

1 — the Cover of a broad tank of the cooling system
2 — the Overflow tube
3 — the Line of a cooling path
4 — the Line of a cooling path
5 — the Line of a cooling path
6 — the Contact socket
7 — the Broad tank
8 — the Vacuum hose of system of ventilation of a case

9 — the Air duct
9/1 — the Bolt
10 — the Air cleaner
11 — an air duct Clamp
12 — Rezonatornaya the camera
13 — the Contact socket of an electrical wiring of the MAF sensor
B2/5 — the MAF Sensor


 PERFORMANCE ORDER

  1. Details of installation of components of an inlet air path on models 163.172/174/175 (series 113 engines) are shown on an illustration to which all references which are found in the text belong.
  2. Having opened a cover (1), dump excessive pressure in a broad tank of the cooling system (7).
  3. Disconnect from a broad tank (7) an overflow tube (2).
  4. Disconnect (7) lines (3, 4 and 5) of a cooling path from a broad tank.
  5. Remove a broad tank (7).
  6. Disunite the contact socket (6) of the MAF (B2/5) sensor.
  7. Disconnect a vacuum hose (8) of system of ventilation of a case.
  8. Having turned out a bolt (9/1), separate an air sleeve (9) from a cover of a head of cylinders.
  9. Remove the MAF (B2/5) sensor from the air cleaner (10).
  10. Wring out the screw-driver the blocking mechanism (11) of an air sleeve down.
  11. Remove the rezonatorny camera (12).
  12. Remove a sleeve (9) assembled with the MAF (B2/5) sensor.
  13. Installation is made upside-down.