Mercedes M-Class W163

since 1997 release

Repair and operation of the car

Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
- Manual box of gear shifting
   Adjustment of the drive of switching of RKPP 717.461
   Removal and installation of the lever of switching of RKPP 717.461
   Features of a design of the shtokovo-trosovy drive of switching of RKPP 716.644
   Removal and installation of the lever of switching of RKPP 716.644
   Removal and RKPP installation
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of the lever of switching of RKPP 717.461

Details of installation of the lever of gear shifting of RKPP 717.461

1-2 — the Intermediate lever of switching 1-2
3-4 — the Intermediate lever of switching 3-4

5-R — the Intermediate lever of switching 5-R

Details of installation of the lever of gear shifting of RKPP 717.461


2 — Fixing bolts	S16/2 — the Sensor switch of fires of a backing

PERFORMANCE ORDER

Details of installation of the lever of switching of RKPP 717.461 (model ML 230) are shown on illustrations to which all references which are found in the text belong.
Include neutral transfer.
Disconnect intermediate levers of switching (1-2, 3-4, 5-R).
Uncover the switching lever basis.
Disconnect an electrical wiring from the sensor switch of fires of a backing (S16/2).
Release from clamps and take aside a cable of the drive of the parking brake.
Release bolts (2) and remove the bearing arm.
Installation is made upside-down. In conclusion make adjustment of the drive (see the Section Search of Malfunctions - the general information).