Mercedes M-Class W163

since 1997 release

Repair and operation of the car


Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
- Transmission line
   - Coupling
      Assessment of degree of wear of the conducted clutch plate
      Removal, installation and check of coupling
      Removal and installation of the main cylinder
      Removal and installation of the executive cylinder of coupling
      Removal of air from a hydraulic path of the drive of coupling
   + Driveshafts
   + Power shafts
   + Transfer case and differentials
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of the main cylinder

Details of installation of the main cylinder of the drive of coupling

18 — Vsp. spring
29 — the Lock ring

011 — the Clamp


 PERFORMANCE ORDER

  1. Details of installation of the main cylinder are shown on an illustration to which all references which are found in the text belong.
  2. Uncover under the dashboard at the left.
  3. Disconnect a hose (14) and a tube (17) from the main cylinder (11), - try not to allow hits of hydraulic liquid on the painted body surfaces.
  4. Disconnect the main cylinder (11) from an arm of pedal assembly (10).
  5. Unhook a returnable spring (15).
  6. Remove a lock ring (12).
  7. Installation is made upside-down.
  8. In conclusion check components of a hydraulic path for existence of signs of development of leaks, remove air traffic jams (see the Section Removal of Air from a hydraulic path of the drive of coupling).