Mercedes M-Class W163

since 1997 release

Repair and operation of the car

Removal and installation of panels of finishing of body racks

Racks And

Details of installation of the panel of finishing are resistant And (on the example of release models till 31.08.98)

PERFORMANCE ORDER

Details of installation of the panel of finishing are resistant And shown on an illustration to which all references which are found in the text belong. Separate a door sealant (2) around a rack And. On release models till 31.08.98 remove caps (3) and turn out fixing screws (4), in the lower part the panel fastens to the dashboard by means of clamps. On release models from 01.09.98 release the top and lower clamps of fastening of the finishing panel (1). Remove the panel (1). Installation is made upside-down, - track reliability of a zashchelkivaniye of clamps. At installation of the panel of the new version on release model till 31.08.98 it is necessary to expand slightly screw openings in a rack under installation in them of the top clamps.

Racks In

Details of installation of the panel of finishing are resistant In

1 — the Anchor bolt of a seat belt 2 — Self-tapping screws 3 — the Lower finishing panel	4 — Self-tapping screws 5 — the Top finishing panel 6 — the Regulator of provision of the top anchor knot of a seat belt

PERFORMANCE ORDER

Details of installation of the panel of finishing of a rack In are shown on an illustration to which all references which are found in the text belong. Remove an overlay of a threshold of the corresponding door (see the Section Removal and installation of overlays of door thresholds). Separate door a sealant on both sides of a rack of Century. Turn out an anchor bolt (1) of a seat belt. Turn out screws (2) and remove the lower panel (3) finishings of a rack. On release models from 01.09.01 remove to Schild with marking of SRS and turn out the screw located under it. Turn out screws (4) and, having released clamps, remove the top section (5) of finishing of a rack. Installation is made upside-down, - track correctness of placement of the regulator of the top anchor knot of a seat belt (6) in a reception nest of the finishing panel (5). Make sure of reliability of a zashchelkivaniye of clamps.

Racks of C

Details of installation of the panel of finishing are resistant With

1 — the Screw 2 — Anchor knot of a seat belt 3 — the Remote plug 4 — the Arm	5 — the Cover 6, 7 — Screws 8 — the Finishing panel

PERFORMANCE ORDER

Details of installation of the panel of finishing of a rack With are shown on an illustration to which all references which are found in the text belong. At the corresponding complete set remove a seat of the third additional row. Remove safety network On models ML 55 AMG remove a casing under storage of a spare wheel. Remove the back ceiling panel, - at the corresponding complete set do not turn out the anchor screw of a seat belt of a seat of the third row. Remove an overlay of a threshold in the luggage compartment of the car. Put a back seat forward. On models with A145273, X708319 remove from VIN to Schild with marking of SRS and turn out the screw located under it. Turn out the screw (1) and remove the remote plug (3) of anchor knot (2) seat belts of a back seat. Remove from the panel (8) arms (4). Open and uncover (5). Turn out screws (6 and 7), release the top clamps and remove the finishing panel (8), having released from it a tape of a belt. At service of the right rack remove the socket of onboard power supply. Installation is made upside-down, - track reliability of a zashchelkivaniye of clamps.