- The corresponding illustrative material is presented on an illustration to which all references which are found in the text belong.
- Uncover an overlay of a threshold of the corresponding door (1) (see the Section Removal and installation of overlays of door thresholds).
- Turn out two forward screws from an overlay of a threshold.
- Separate the bottom forward corner of a door sealant (2).
- When working in a driver's foot well turn out a bolt (5) of fastening of the lever of an otpuskaniye of a latch of the lock of a cowl (6) to A. Otsoyedinite's rack a driving cable and remove the lever (6).
- At removal of finishing of a passenger well release, having turned on 1/4 turns counterclockwise and having brought into vertical position, clamps of a cover of the saloon assembly block of safety locks and the relay (8), then give a nut (9).
- Having released the remained clamps, remove the finishing panel (3 or 4), in case of need slightly raise an overlay of a threshold.
- Installation is made upside-down.
|
|