Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
- Power supply system and production of the fulfilled gases
   + Power supply system of petrol engines
   - Power supply system of diesel engines
      General information
      Checks of system of injection of fuel
      Service of components of an inlet air path
      Service of components of the drive of a butterfly valve
      Depletion of the fuel tank
      Removal and installation of the sensor of a reserve of fuel
      Removal of air from a contour of low pressure of a fuel path, - on the example of the series 612 engine
      Removal and installation of the preliminary fuel pump
      Removal and installation of the fuel pump of high pressure (FPHP)
      Removal and installation of the fuel distributive highway and nozzles
      Removal and installation of the sensor of pressure in the fuel highway
      Removal and installation of the electric locking valve, - model 163.113
      Removal and installation of the valve regulator of pressure of fuel
      Removal and installation of valvate assembly on models 163.128
      Removal and installation of a cooler of fuel on models 163.113
      Removal and installation of the module of management of fuel injection
      Removal and installation of the fuel tank
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal of air from a contour of low pressure of a fuel path, - on the example of the series 612 engine

Removal of air from a contour of low pressure of a fuel path of the engine of a series 612

1 — the Union of the returnable fuel line
2 — the Ventilating hose

3 — the Ventilating pump


 PERFORMANCE ORDER

  1. Illustrative material on implementation of the procedure of removal of air from a contour of low pressure of a fuel path of the engine of a series 612 is presented on an illustration to which all references which are found in the text belong.
  2. Remove panels of finishing of a head of cylinders.
  3. Disconnect the line of return of fuel from the union (1).
  4. Connect to the released union (1) a ventilating hose (2).
  5. Connect the ventilating pump (3) to a lighter nest.
  6. Perform the procedure of airing until fuel in a final stream does not cease to bubble.
  7. Switch-off the pump (3) and restore initial connection of lines of communication.
  8. Installation of the removed components is made as it should be, the return to an order of their dismantle.