Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of levers of screen wipers
      Removal of the drive of forward screen wipers
      Removal and installation of sliding telescopic snuffled faroomyvatel
      Removal, installation and adjustment of a cowl
      Replacement of loops of a cowl
      Removal and installation of an emblem Mercedes
      Removal, installation and service of components of the lock of a cowl
      Removal and installation of a gas-filled emphasis of fixing of a cowl in open situation
      Removal and installation of the tank of the washing liquid
      Removal and installation of a front bumper
      Removal and installation of the top forward cross beam of a frame
      Removal and installation of panels of the lower protection of a motive compartment
      Removal and installation of a rear bumper
      Removal and installation of the external holder of a spare wheel (at the corresponding complete set)
      Removal and installation of loker of protection of wheel arches
      Removal and installation of doors
      Removal and installation of limiters of opening of side doors
      Removal and installation of loops of a door of a back
      Removal and installation of a gas-filled sliding emphasis of a door of a back
      Removal and installation of external handles of doors
      Removal and installation of panels of an internal upholstery of door assemblies
      Removal and installation of door locks
      Removal and installation of door rear-view mirrors
   + Equipment of salon
+ Onboard electric equipment


Removal and installation of a rear bumper

Models of a basic equipment without external holder of a spare wheel

Details of installation of a rear bumper on models standard (not AMG) complete sets without external holder of a spare wheel

And — Covers
In — Nuts

With — Screws


 PERFORMANCE ORDER

  1. Details of installation of a rear bumper on models standard (not AMG) are shown to a complete set without external holder of a spare wheel on an illustration to which all references which are found in the text belong.
  2. At the corresponding complete set disunite the contact socket of an antenna cable of system of an emergency call (E-call) which is located under a side overlay of the right rack With in a poddomkrachivaniye point.
  3. Having hooked a suitable wedge, uncover and give nuts (E) and screws (C).
  4. At the corresponding complete set release a nut of fastening of a mud-chipper.
  5. Having given back, accurately remove a bumper, - try not to damage a paint and varnish covering.
  6. At the corresponding complete set remove the antenna of an emergency call (E-call) on the right side of a body.
  7. Installation is made upside-down, track correctness of landing of a bumper concerning a door of a back and the back combined lamps.

Models of a basic equipment without external holder of a spare wheel

Details of installation of a rear bumper on models standard (not AMG) complete sets, equipped with the external holder of a spare wheel


 PERFORMANCE ORDER

  1. Details of installation of a rear bumper on models standard (not AMG) complete sets, equipped with the external holder of a spare wheel are shown on сопр. an illustration to which all references which are found in the text belong.
  2. At the corresponding complete set disunite the contact socket of an antenna cable of system of an emergency call (E-call) which is located under a side overlay of the right rack With in a poddomkrachivaniye point.
  3. Give nuts (A) and (In) on the car bottom behind a cross beam of a frame.
  4. Turn out bolts of fastening of console arms (D) holder of a spare wheel.

The bolts fixed by means of nuts (A) can be pushed out from the back party of a cross beam.

  1. Remove console arms (D) holder of a spare wheel (see the Section Removal and installation of the external holder of a spare wheel (at the corresponding complete set)).
  2. Carefully remove 3 bumper panels, - try not to damage a paint and varnish covering and clamps.
  3. At the corresponding complete set give a nut of a back mud-chipper.
  4. Having against the stop taken away to the holder of the spare wheel back, give back and accurately remove a bumper, - try not to damage a paint and varnish covering.
  5. At the corresponding complete set remove the antenna of an emergency call (E-call) on the right side of a body.
  6. Installation is made upside-down, track correctness of landing of a bumper concerning a door of a back and the back combined lamps.

AMG complete set models

Details of installation of a rear bumper on AMG complete set models


 PERFORMANCE ORDER

  1. Details of installation of a rear bumper on models of a complete set of AMG are shown on сопр. an illustration to which all references which are found in the text belong.
  2. At the corresponding complete set disunite the contact socket of an antenna cable of system of an emergency call (E-call) which is located under a side overlay of the right rack With in a poddomkrachivaniye point.
  3. Turn out screws (A) of fastening of assembly brackets of an udaropoglotitel to the lower part of a cross beam.
  4. Remove a decorative slip (Velkro) and turn out the screws (V) located on the upper edge of a bumper.
  5. Having given back, accurately remove a bumper, - try not to damage a paint and varnish covering and an electrical wiring, - at the corresponding complete set remove a rubber sealant at the left on a body and disunite the contact socket of an electrical wiring of the Parktronic system.
  6. At the corresponding complete set remove the antenna of an emergency call (E-call) on the right side of a body.
  7. Installation is made upside-down, track correctness of landing of a bumper concerning a door of a back and the back combined lamps.