Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of levers of screen wipers
      Removal of the drive of forward screen wipers
      Removal and installation of sliding telescopic snuffled faroomyvatel
      Removal, installation and adjustment of a cowl
      Replacement of loops of a cowl
      Removal and installation of an emblem Mercedes
      Removal, installation and service of components of the lock of a cowl
      Removal and installation of a gas-filled emphasis of fixing of a cowl in open situation
      Removal and installation of the tank of the washing liquid
      Removal and installation of a front bumper
      Removal and installation of the top forward cross beam of a frame
      Removal and installation of panels of the lower protection of a motive compartment
      Removal and installation of a rear bumper
      Removal and installation of the external holder of a spare wheel (at the corresponding complete set)
      Removal and installation of loker of protection of wheel arches
      Removal and installation of doors
      Removal and installation of limiters of opening of side doors
      Removal and installation of loops of a door of a back
      Removal and installation of a gas-filled sliding emphasis of a door of a back
      Removal and installation of external handles of doors
      Removal and installation of panels of an internal upholstery of door assemblies
      Removal and installation of door locks
      Removal and installation of door rear-view mirrors
   + Equipment of salon
+ Onboard electric equipment


Removal and installation of external handles of doors

Forward doors

Details of installation of the external handle of a forward door

9 — Screws

10 — the Opening under the screw


 PERFORMANCE ORDER

  1. Details of installation of the external handle of a forward door are shown on an illustration to which all references which are found in the text belong.
  2. Release the fixing screw (6).
  3. Take and remove a guide of the castle cylinder (2).
  4. Delay the handle (1) assembled with the basis (4) back and release it from the bearing arm (8).
  5. Remove the basis (5).
  6. In case of need remove an internal upholstery and a sealing film (see the Section Removal and installation of panels of an internal upholstery of door assemblies) and through a service window in a doorframe take the bearing arm (8) of the external handle.
  7. Installation is made upside-down, - track correctness of landing of the basis (5) on the bearing arm (8). At installation of a guide of the castle cylinder (2) track correctness of input of a rotary rod (3) in gearing with the executive mechanism of the lock.

Back doors

Details of installation of the external handle of a back door

7 — Screws

8 — the Opening under the screw


 PERFORMANCE ORDER

  1. Details of installation of the external handle of a back door are shown on an illustration to which all references which are found in the text belong.
  2. Release the fixing T25x100 (3) screw.
  3. Remove a guide (2).
  4. Delay the handle (1) assembled with the basis (4) back and release it from the bearing arm (6).
  5. Remove the basis (5).
  6. In case of need remove an internal upholstery and a sealing film (see the Section Removal and installation of panels of an internal upholstery of door assemblies) and through a service window in a doorframe take the bearing arm (6) of the external handle.
  7. Installation is made upside-down, - track correctness of landing of the basis (5) not bearing arm (6).

Back door

Details of installation of the external handle of a door of a back


 PERFORMANCE ORDER

  1. Details of installation of the external handle of a door of a back are shown on an illustration to which all references which are found in the text belong.
  2. Remove an internal upholstery of door assembly (see the Section Removal and installation of panels of an internal upholstery of door assemblies).
  3. Give nuts (2) from the inside of a door.
  4. Disconnect an electrical wiring of lamps of illumination of registration plate (E19/3 and E19/4).
  5. Turn out screws (3) from the outer side of a door and remove the handle (1), - try not to damage a paint and varnish covering.
  6. Installation is made upside-down.