Mercedes M-Class W163

since 1997 release

Repair and operation of the car



Mercedes W163
+ Mercedes-Benz cars of a class M (W163)
+ Governing bodies and methods of safe operation
+ Current leaving and service
+ Engine
+ Cooling systems, heating and air conditioner
+ A power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Transmission line
+ Brake and auxiliary systems
- Suspension bracket and steering
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Filling and "pumping" of the steering pump
      Check of a pressure of the steering pump
      Replacement of a collar of fastening of a hose of a path of cooling of GUR liquid
      Assessment of a condition of hinges of steering drafts and boots of a case of rack transfer
      Removal and installation of the steering pump
      Replacement of boots of a case of the steering mechanism
      Removal and installation of tips of steering draft
      Removal installation of entrance knot of the steering mechanism
      Removal and installation of the steering mechanism
      Dismantling of the mechanical regulator of a steering column
      Removal and installation of a steering wheel and spiral contact drum of a steering column
      Removal and installation of the cylinder of the lock of ignition
      Removal and installation of the lock of blocking of a steering column
      Removal and installation and shirts of a steering column
   + Suspension bracket geometry
+ Body
+ Onboard electric equipment


Removal and installation of the steering pump

Details of installation of the steering pump


 PERFORMANCE ORDER

In total самоконтрящиеся bolts and nuts are subject to replacement without fail!

  1. Details of installation of the steering pump are shown on an illustration to which all references which are found in the text belong.
  2. Take off a driving belt.
  3. Pump out hydraulic liquid from the GUR tank (30a).
  4. Disconnect and at once to a zakuporta the returnable line (30f).
  5. Disconnect and at once to a zakuporta a pressure head broad hose (30i).
  6. Release fixture and remove the steering pump (30) assembled with the GUR tank (30a).
  7. Having hooked the screw-driver take a lock ring (30s) and remove the GUR tank from pump assembly.

In case of need the tank can be removed in an individual order without preliminary dismantle of the pump.

  1. Installation is made upside-down, - do not forget to replace all sealing elements (30b, 30h), track correctness of landing of a lock ring (30s) fastenings of the tank.